|
 |
Germ Free Solutions* |
|
|
• New Touchless options from International Door Closers.
• Door Pull, Foot Pull and Foot Pull holder set.
*Note: Only Available at IDC West Coast Warehouse
|
|
|
|
|
Back to Top |
|
|
|
|
SERIES 5000L - Grade 1 Cylindrical Locks |
|
|
IDC locksets are designed for commercial, industrial and institutional use, where dependable operation and longevity is required along with high resistance to vandalism and abuse. Applications include office buildings, government centers, factories, schools and hospitals and more. Internal clutch provides vandal resistance by permitting lever rotation without retracting latch when locked. Independent heavy duty springs provide effective lever return and support.
ANSI / BHMA
- ANSI/BHMA A156.2 Grade 1 strength and
operational requirements
- ANSI A250.13 severe windstorm compliant
UL LISTED
- UL Listed for 3 Hr ‘A’ label or lesser fire rated single doors, 4’ x 8’
- UL10C/UBC-2 positive pressure compliant
- UL10B neutral pressure compliant
ADA
- A/ANSI A117.1 accessibility code compliant
|
|
|
|
|
Back to Top |
|
|
|
|
SERIES 3000 - Grade 2 Cylindrical Locks |
|
|
 Features
- Non-clutched mechanism
- 3000L (Lever)
- 3000K (Knob)
- Heavy duty lever spring return rose assembly
- Bidirectional lever operation, non-handed
- Solid brass latch bolt
- Solid brass Schlage C pin keyway cylinder
- Meets Fire Code (California State Reference Code)
- UL and CUL Listed
- Five year warranty
|
|
|
|
|
Back to Top |
|
|
|
SERIES 1800 - Fixed Spring Power - Surface Grade 1 Closer |
|
|
 Features
- Factory tested to meet or exceed ANSI 156.4 Grade 1
- Narrow designpermits installation on most modern glass and aluminum doors without adapters
- Two Adjustment Valves: Closing and Latching speeds controlled by separate regulating valves, adjustable after installation.
- Standard application for regular arm and Top Jamb installation; optional parallel arm installation (requires optional PA bracket.)
- Slim Plastic Cover or Full Cover (optional)
- Ranges of Sizes
Standard: 1852, 1853, 1854, and 1855.
Back-Check: 1882, 1883, 1884, and 1885
- 5 year warranty
- All Weather Fluid
|
|
|
|
|
Back to Top |
|
|
|
SERIES 8000 - Surface Applied Grade 1 Closer |
|
|
 Features
- UL 10C Fire Rated
- Factory tested to meet or exceed ANSI 156.4 Grade 1
- Adjustable spring power 1 through 6
- Cast aluminum body; forged steel arm
- Standard sweep and latching speed
- Standard adjustable backcheck or without backcheck
- Standard Tri-packed for regular arm, top jamb and
parallel arm application
- Standard self tapping and drilling screws
- 10 years limited warranty
- Cross reference: Norton 1600 or 1601 Series
|
|
|
|
|
Back to Top |
|
|
|
SERIES 5000 - Exit Devices - Light Duty Models |
|
|
 International Door Closers IDC 5000 Series Exit Devices meet the Life and Fire Safety Codes as prescribed by UL and ANSI / BHMA 156.3 standards. These durable devices are designed for both standard and commercial applications. The 5000 Series were tested and approved by Underwriters Laboratories (UL, USA and ULC, Canada) and listed to comply with UL 10C, and Uniform Building Code Standard 7-2, “Fire Test of Door Assemblies” (1997).
Features
- All devices are non-handed design
- Auxiliary guarded latch deadlocks latch bolt automtically locks when the door is closed
- High shock-resistant latching mechanical design or protection from vandalism
- All inside components are made of high rust-resistant alloy or heavy electroplated steel
- Baked powder coating, electroplated or architectual base finishes are used on all exposed surfaces
- Outside trims are provided by rose and escutcheon lever or knob in a varity of styles
- All trim, features a through-bolted design to the devices that allow easy installation but not to comprise on security
- With a dogging mechanism, users have a choice of hex-key or cylinder operated design for a positive push-pull door action during peak traffic time
|
|
|
Back to Top |
|
|
|
SERIES 8000 - Exit Devices - Heavy Duty Models - Grade 1 |
|
|
 IDC 8000 Series Exit Devices are heavy duty and designed for heavy traffic applications. The devices are Underwriters Laboratory (UL, USA and ULC, Canada) listed for Panic Exit Hardware or Fire Exit Hardware, and are certified to ANSI A156.3-2001 Grade 1.
Features
- All devices are non-handed design
- Slight pressure on device touch bar will retract latch(s) for immediate exit
- Auxiliary guarded latch deadlocks latch bolt automatically when door is closed
- High shock-resistant latching mechanical design for protection from vandalism
- All inside components are made of high rust-resistant alloy or heavily electroplated
steel
- Anti-fading, electroplated or architectual base material finishes on all exposed
surfaces are available
- With a dogging mechanism, users have a choice of hex-key or cylinder operated for
positive push-pull action at peak traffic time. This dogging device will also help by
increasing the life of the exit device (panic label only).
|
|
|
Back to Top |
|
|
|
Electro-Magnetic Door Holders |
|
|
 The 2000 Series Electro-magnetic Door Holders is Tri-Voltage . Each model (except 2500) can be wired 12V DC, 24V AC/DC or 120V AC. Units can be used on fire/smoke barrier doors held open until released by a remote switching device. They can also be used to just hold a door open. The armature is thru-bolted to the door for security and can be provided with any projection required. When ordering indicate, model, total projection, finish and door thickness if other than 1-3/4”.
Features
- 30-45 pound holding power (except 2500 - 300 lbs.)
- Underwriters US and Canada Listed
California State Fire Marshal Listed
New York City MEA
ANSI/BHMA 156.15
- Most models available in US28, sprayed finishes and US32D
- Easy wire installation with quick insert connector
- Armature has 360o Mobility
- No Plastic Parts
|
|
|
|
|
Back to Top |
|
|
|
Continuous Gear Hinges |
|
|
 IDC Continuous Gear Hinges are all heavy duty. All hinges have double the number of bearings of standard duty hinges and are pinless. There are no accessible screws, bolts or pins when the door is closed. IDC gear hinges are surface applied to the frame and door. No machining is required. Whether surface mount or concealed, the IDC continuous gear hinges eliminate the gap between the door and frame, and provide a weatherproof, tamper-proof barrier. The IDC gear hinge is templated and the hole pattern is the same from hinge to hinge. All units (except A130) are UL Listed.
Features
- Extruded 6063-T6 aluminum alloy
- Polyacetal thrust bearings
- 83”, 85”, 95” and 120” are standard – Other sizes available
- IDC continuous gear hinges are offered in 30 minute clear anodized and 2-step dark bronze anodized
- IDC gear hinges are non-handed unless cut in the field.When field cut, the hinge becomes handed
- #12-24 x 1/2” self-drilling screws standard for concealed hinges.Wood and security screws available.
- IDC can provide any custom mounting hole location per customer specifications.
|
|
|
|
|
Back to Top |
|
|
|
Roller Latches |
|
|
 IDC Roller Latches are easily adjustable for roller projection for proper contact between roller and frame strike. Adjustment is made with 2 screws on the face of the roller latch body. Maximum roller projection is 5/16”. The nylon roller provides durability and quiet operation. All units are stainless steel construction. Meets ANSI/BHMA A156.16, E19091. Available in most architectural finishes. Custom strikes available. |
|
|
|
|
Back to Top |
New Stainless Steel Products
|
 |
Stainless Steel Offset Pivot Sets |
|
|
 Pivot sets include top and bottom pivots. Offset pivot sets are handed and require an intermediate pivot to accommodate the door weights listed for each set. Door edges must be beveled 1/8” in 2”. All sets are available in standard architectural finishes.
Features
- US32D models listed for use on 3 hour fire doors
- BHMA/ANSI C07162/3530A (modified)
|
|
|
|
|
Back to Top |
|
|
|
Stainless Steel Center Hung Pivots |
|
|
 Pivot sets include top and bottom pivots. All center hung pivot sets are non-handed and double acting. Intermediate pivots are not used. Center hung pivots are not allowed with labeled doors. Door must be radiused on pivot edge. All sets are available in standard architectural finishes.
- 0127
- For interior door up to 3’6” x 8’6”
- Weight to 200 lbs.
- 0128
- For interior doors up to 3’6” x 8’6”
- Weight to 250 lbs.
- 0327
- Light Duty Pivot for double acting interior doors
- For doors up to 135 pounds, 1-3/8”
and 1-3/4” thick and up to 3’ wide
- 0370
- For interior doors or exterior doors up to 4’0” x 8’6”
- Weight to 500 lbs.
|
|
|
|
|
Back to Top |
|
|
|
Stainless Steel Intermediate Offset Pivots |
|
|
 Intermediate pivots are used to keep doors in alignment. All intermediate pivots are offset hung and cannot be used on center hung doors. Per NFPA 80, fire doors are to have an intermediate pivot for additional 30” or fraction thereof for door heights over 6’. Available in most architectural finishes.
|
|
|
|
|
Back to Top |
|
|
|
Stainless Steel Continuous Hinges |
|
|
 IDC stainless steel hinges are full height piano hinges that provide support for the full height of the door.
Features
- For doors up to 600 lbs.
- 4’0” maximum door width
- Hinge leafs are 14 Ga., 304 stainless steel
- Pin is 1/4 diameter 304 stainless steel, barrel .438 diameter
- Knuckles are 2” long with Delrin TM bearings between each
- Hinges -Nominal Sizes 7’ (83-1/8”), 8’ (95”) & 10’ (118-3/4”) are non-handed. 6’8” (78-3/4”) & 7’2” (85”) are handed
- Special lengths available
- Standard finish-US32D
- Self-drilling screws standard, security screws available (wood or machine)
- Fire Rating-UL and ULC fire Listed
- 3 hours-hollow metal door
- 90 min.-hollow metal and composite core wood fire door
- 20 min.-wood door
- Custom Cut outs available
|
|
|
|
|
Back to Top |
